1/2″ to 2″ (13 mm to 51 mm) rigid shoe unit2,936.33$
1/2″ to 2″ (13 mm to 51 mm) rigid shoe unit
2,936.33$
- Allows you to bend pipes from 13 mm to 51 mm (1/2″ to 2″) on a shoe
- No spare parts
- One-time installation
- The reduced lift prevents the operator from becoming too tired. Works with Greenlee 555CX, 555DX and 555C electrical conduit benders
| Medium bending radius | 13 mm to 108 mm (1/2″ to 4 1/4″) |
| 19 mm to 138 mm (3/4 in. to 5 7/16 in.) | |
| 25 mm to 177 mm (1 in. to 6 15/16 in.) | |
| 32 mm to 222 mm (1 1/4 in. to 8 3/4 in.) | |
| 38 mm to 210 mm (1 1/2 in. to 8 1/4 in.) | |
| 51 mm to 229 mm (2 in. to 9 in.) | |
| Tube Diameter | RIGID 13 mm to 51 mm (1/2″ to 2″) |
| Type | Clog Group |
| Duct Type | Rigid |
| Bending radius | 13 mm to 108 mm (1/2″ to 4 1/4″) |
| 19 mm to 138 mm (3/4 in. to 5 7/16 in.) | |
| 25 mm to 177 mm (1 in. to 6 15/16 in.) | |
| 32 mm to 222 mm (1 1/4 in. to 8 3/4 in.) | |
| 38 mm to 210 mm (1 1/2 in. to 8 1/4 in.) | |
| 51 mm to 229 mm (2 in. to 9 in.) | |
| Application | Duct bending |
| Capacity | Rigid shoe from 13 mm to 51 mm (1/2 in. to 2 in.) |
| *Greenlee® may make improvements and/or changes in product specifications at any time, in its sole discretion, without notice or obligation and further reserves the right to change or discontinue models. |