Puller Assembly (UT10-22 | 230 Volt)15,065.34$
Puller Assembly (UT10-22 | 230 Volt)
15,065.34$
Add the desired quantity to the selected products.
- 2-Speed motor that delivers the fastest pulling time for all pulling needs over the widest (10000 LB) range
- Strong, rugged motor designed specifically for both big and small cable pulling applications up to 10000 LB
- Easy control features for increased productivity
- On-board force gauge provides visual communication of pulling force and speed changes
- Quick speed change from high to low by simply double tapping foot pedal
Specifications
| Sub-brand name | Ultra Tugger |
| Charge | Continuous operation: 0 to 28,9 kN (0 to 6 500 LB), 15 MINUTES ON/15 MINUTES OFF: 28,9 to 35,6 kN (6 500 to 8 000 LB), momentary: 35,6 to 44,5 kN (8 000 to 10 000 LB) |
| Cable type | Electrical cable |
| Nominal Voltage | 230 volts |
| Speed | High speed: 4,88 M/MIN (16 FT/MIN) no load, 4,27 M/MIN (14 FT/MIN) at 8,9 kN (2 000 LB), 3,66 M/MIN (12 FT/MIN) at 17,8 kN (4 000 LB); low speed: 2,13 M/MIN (7 FT/MIN) at 26,7 kN (6 000 LB), 1,83 M/MIN (6 FT/MIN) at 35,6 kN (8 000 LB) |
| Montage | Floor mount |
| Drive motor rating | Cable required: 22,2 mm (7/8 in) diameter double-braid polyester composite cable; minimum average breaking strength of 143 kN (32 000 lb) |
| Includes | (1) UT10-22 The Ultra Tugger® 10, (1) fixation au sol 00865 |
| Type | Cable puller |
| Application | Electrical cable pulling |
| Capacity | The no-load low speed is 2,75 M/MIN (9 FT/MIN) and it can be used with loads up to a maximum of 35,6 kN (8 000 LB), where the speed would be 1,83 M/MIN (6 FT/MIN), or a maximum momentary capacity of 44,5 kN (10 000 lb) |
| Rated current | 12 A |
| Tension | 220 V |
| * Greenlee® may make improvements and/or changes in product specifications at any time, at its sole discretion, without notice or obligation, and further reserves the right to change or discontinue models. |